Search
Close this search box.

Disinfector & Fogging Systems

Vehicle Mounted DisinfectorTM System

 

A high-capacity system for environmental cleaning and disinfection procedures facilitates rapid and thorough disinfection of environmental surfaces with water and hospital-level disinfectants such as Sodium Hypochlorite at 0.1% or greater. Ionic’s Disinfector System has a capacity of 1200ltrs, and in operation, up to 600 sqm per hour can be treated by a single operator. Up to four operatives may be deployed from a single van mounted system giving a working time of 2-3 hours before replenishing with mains water. Spray application can be carried out up to a height of 20mtrs from the safety of the ground using light weight composite telescopic poles as well as a ground to 3mtrs height from hand-held lances. A range of up to 200mtrs in every direction is possible from a parked and secured vehicle with remote control as required. The system uses trusted 12v pumps and control system, chemical dosing takes place post pump to ensure reliability of the entire system. “On inanimate surfaces human coronaviruses can remain infectious for up to 9 days. A surface disinfection with 0.1% sodium hypochlorite, 0.5% hydrogen peroxide or 62%–71% ethanol can be regarded as effective against coronaviruses within 1 min. A similar effect can be expected against the SARS-CoV-2”. Quote from Science Direct.

  • Disinfector Systems can be installed in just two hours with training supplied simultaneously.
  • Ionic Systems Ltd is a Swindon based, in-house manufacturer with a UK network of fitting and service centres.
  • Vehicle mounted disinfection systems have been crash tested at Thatcham Vehicle Research to FMVSS-208 standard.
  • Ionic Systems training arm has been a City & Guilds NVQ centre since 1997.
  • Ionic Systems is a member of JPEG, our chemicals partner is Evans Vanodine.
  • Ionic Systems has distributors in most developed countries.

 

DisinfectorTM Plus System

In addition to the Disinfector System, the Disinfector Plus can be used for applying disinfectants, for sanitising hard and soft surfaces through a hand held fogging lance that is fed from a self-contained pressurised air feed, fused with disinfectant to create a fog. The Fog gets into all areas, leaving a thin coated film of disinfectant on all surfaces, to effectively sanitise areas quickly and efficiently.

DisinfectorTM PLUS A Ultra low volume fogging machine

 

Ultra-low volume (ULV) fogging machines are cold fogging machines that use large volumes of air at low pressures to transform liquid into droplets. These droplets are dispersed into the atmosphere. The droplets that are created are of such a small size that less carrier for the formulation is required to cover the required surface area.

One of the most significant benefits of using this type of fogger is that you can control the size of the solution particles it creates and sends through the air. This means that you can tailor the machine for just about any circumstance. In this instance (tackling covid-19), when disinfecting an interior room, we use much smaller particles because they can penetrate small nooks and crannies and they stay in the air longer.

 

AquaAirTM Stainless Reels

 

These hose reels are used in combination with the DisinfectorTM PLUS system.

Thermo FoggerTM Hand Fogging systems are also available

Download the Brochure with the pricing

Download NOw

Read the full article by Craig Mawlam

Read Now

Product Enquiry

Please fill out the form below and we will contact you ASAP.

Product Enquiry

Please fill out the form below and we will contact you ASAP.

Product Enquiry

Please fill out the form below and we will contact you ASAP.

Product Enquiry

Please fill out the form below and we will contact you ASAP.

Product Enquiry

Please fill out the form below and we will contact you ASAP.

Product Enquiry

Please fill out the form below and we will contact you ASAP.

Product Enquiry

Please fill out the form below and we will contact you ASAP.

Product Enquiry

Please fill out the form below and we will contact you ASAP.

Product Enquiry

Please fill out the form below and we will contact you ASAP.

Product Enquiry

Please fill out the form below and we will contact you ASAP.

Product Enquiry

Please fill out the form below and we will contact you ASAP.

Product Enquiry

Please fill out the form below and we will contact you ASAP.

Product Enquiry

Please fill in the form below and we will contact you ASAP.

Brush head options

Grafter

Perfect for residential window cleaning. 

Swift

Best suited for commercial window cleaning.

Vertigo

Standard Head

Excellent in both residential and commercial window cleaning.

Vertigo

Quick-Release

Excellent in both residential and commercial window cleaning.

Glass vs Carbon Fibre

Glass fibre

Our glass fibre mix poles are made from a durable glass/carbon fibre mix. This is perfect for people who are looking for a new waterfed pole on a budget. This material offers a good balance between rigidity and lightness, and the added carbon gives added durability. If you require a lighter and more durable pole please see our range of carbon fibre poles.

Carbon fibre

Our carbon fibre poles are made from durable carbon fibre. This is perfect for people who require a new waterfed pole, with greater rigidity and durability, they are also lighter than our glass/carbon fibre mix poles. If you require an even more durable pole that will not succumb to bend and flex when used to reach higher elevation surfaces, please see our range of carbon fibre plus poles (*only available in lengths of 35ft and upwards).

Carbon fibre +
(available from 35ft and upwards)

Our carbon fibre plus poles are made from high modulus grade carbon fibre. This is perfect for people who require a pole that will not succumb to bend and flex when used to clean at higher elevations. This range of poles offer greater durability and rigidity than our carbon fibre poles, and will make cleaning surfaces a lot easier when cleaning at height.